1. What is difference between oracle SID and Oracle service name?
Oracle SID is the unique name that uniquely identifies your instance/database where as the service name is the TNS alias can be same or different as SID.
2. What are the steps to install oracle on Linux system? List two kernel parameter that effect oracle installation?
Initially set up disks and kernel parameters, then create oracle user and DBA group, and finally run installer to start the installation process. The SHMMAX & SHMMNI two kernel parameter required to set before installation process.
3. What are bind variables?
With bind variable in SQL, oracle can cache queries in a single time in the SQL cache area. This avoids a hard parse each time, which saves on various locking and latching resource we use to check object existence and so on.
4. What is the difference between data block/extent/segment?
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
5. What is the difference between PGA and UGA?
When you are running dedicated server then process information stored inside the process global area (PGA) and when you are using shared server then the process information stored inside user global area (UGA).
6. What is SGA? Define structure of shared pool component of SGA?
The system global area is a group of shared memory area that is dedicated to oracle instance. All oracle process uses the SGA to hold information. The SGA is used to store incoming data and internal control information that is needed by the database. You can control the SGA memory by setting the parameter db_cache_size, shared_pool_size and log_buffer.
Shared pool portion contain three major area:
Library cache (parse SQL statement, cursor information and execution plan),
data dictionary cache (contain cache, user account information, privilege user information, segments and extent information,
data buffer cache for parallel execution message and control structure.
7. What is the difference between SMON and PMON processes?
SMON (System Monitor) performs recovery after instance failure, monitor temporary segments and extents; clean temp segment, coalesce free space. It is mandatory process of DB and starts by default.
PMON (Process Monitor) failed process resources. In shared server architecture monitor and restarts any failed dispatcher or server process. It is mandatory process of DB and starts by default.
8. What is a system change number (SCN)?
SCN is a value that is incremented whenever a dirty read occurs.
SCN is incremented whenever a deadlock occurs.
SCN is a value that keeps track of explicit locks.
SCN is a value that is incremented whenever database changes are made.
9. What is the main purpose of ‘CHECKPOINT’ in oracle database? How do you automatically force the oracle to perform a checkpoint?
A checkpoint is a database event, which synchronize the database blocks in memory with the datafiles on disk. It has two main purposes: To establish a data consistency and enable faster database Recovery.
The following are the parameter that will be used by DBA to adjust time or interval of how frequently its checkpoint should occur in database.
LOG_CHECKPOINT_TIMEOUT = 3600; # Every one hour
LOG_CHECKPOINT_INTERVAL = 1000; # number of OS blocks.
10. What happens when we fire SQL statement in Oracle?
First it will check the syntax and semantics in library cache, after that it will create execution plan.
If already data is in buffer cache it will directly return to the client.
If not it will fetch the data from datafiles and write to the database buffer cache after that it will send server and finally server send to the client.
11. What is the use of large pool, which case you need to set the large pool?
You need to set large pool if you are using: MTS (Multi thread server) and RMAN Backups. Large pool prevents RMAN & MTS from competing with other sub system for the same memory. RMAN uses the large pool for backup & restore when you set the DBWR_IO_SLAVES or BACKUP_TAPE_IO_SLAVES parameters to simulate asynchronous I/O. If neither of these parameters is enabled, then Oracle allocates backup buffers from local process memory rather than shared memory. Then there is no use of large pool.
12. What does database do during the mounting process?
While mounting the database oracle reads the data from controlfile which is used for verifying physical database files during sanity check. Background processes are started before mounting the database only.
13. What are logfile states?
“CURRENT” state means that redo records are currently being written to that group. It will be until a log switch occurs. At a time there can be only one redo group current.
If a redo group containing redo’s of a dirty buffer that redo group is said to be ‘ACTIVE’ state. As we know log file keep changes made to the data blocks then data blocks are modified in buffer cache (dirty blocks). These dirty blocks must be written to the disk (RAM to permanent media).
And when a redolog group contains no redo records belonging to a dirty buffer it is in an "INACTIVE" state. These inactive redolog can be overwritten.
One more state ‘UNUSED’ initially when you create new redo log group its log file is empty on that time it is unused. Later it can be any of the above mentioned state.
14. What is log switch?
The point at which oracle ends writing to one online redo log file and begins writing to another is called a log switch. Sometimes you can force the log switch.
ALTER SYSTEM SWITCH LOGFILE;
How to check Oracle database version?
SQL> Select * from v$version;
15. Explain Oracle Architecture?
Oracle Instance:
a means to access an Oracle database,always opens one and only one database and consists of memory structures and background process.
Oracle server:
a DBMS that provides an open, comprehensive, integrated approach to information management,Consists of an Instance and a database.
Oracle database:
a collection of data that is treated as a unit,Consists of Datafiles, Control files, Redo log files. (optional param file, passwd file, archived log)
Instance memory Structures:
System Global Area (SGA):
Allocated at instance startup, and is a fundamental component of an Oracle Instance.
SGA Memory structures:
Includes Shared Pool, Database Buffer Cache, Redo Log Buffer among others.
Shared Pool :
Consists of two key performance-related memory structures Library Cache and Data Dictionary Cache.
Library Cache:
Stores information about the most recently used SQL and PL/SQL statements and enables the sharing of commonly used statements.
Data Dictionary Cache :
Stores collection of the most recently used definitions in the database Includes db files, tables, indexes, columns etc. Improves perf. During the parse phase, the server process looks at the data dictionary for information to resolve object names and validate access.
Database Buffer Cache:
Stores copies of data blocks that have been retrieved from the datafiles. Everything done here.
Redo Log Buffer :
Records all changes made to the database data blocks, Primary purpose is recovery. Redo entries contain information to reconstruct or redo changes.
User process:
Started at the time a database User requests connection to the Oracle server. requests interaction with the Oracle server, does not interact directly with the Oracle server.
Server process:
Connects to the Oracle Instance and is Started when a user establishes a session.
fulfills calls generated and returns results.
Each server process has its own nonshared PGA when the process is started.
Server Process Parses and run SQL statements issued through the application, Reads necessary data blocks from datafiles on disk into the shared database buffers of the SGA, if the blocks are not already present in the SGA and Return results in such a way that the application can process the information.
In some situations when the application and Oracle Database operate on the same computer, it is possible to combine the user process and corresponding server process into a single process to reduce system overhead.
Program Global Area (PGA):
Memory area used by a single Oracle server process.
Allocated when the server process is started, deallocated when the process is terminated and used by only one process.
Used to process SQL statements and to hold logon and other session information.
Background processes:
Started when an Oracle Instance is started.
Background Processes Maintains and enforces relationships between physical and memory structures
There are two types of database processes:
1. Mandatory background processes
2. Optional background processes
Mandatory background processes:
– DBWn, PMON, CKPT, LGWR, SMON
Optional background processes:
– ARCn, LMDn, RECO, CJQ0, LMON, Snnn, Dnnn, Pnnn, LCKn, QMNn
DBWn writes when:
• Checkpoint occurs
• Dirty buffers reach threshold
• There are no free buffers
• Timeout occurs
• RAC ping request is made
• Tablespace OFFLINE
• Tablespace READ ONLY
• Table DROP or TRUNCATE
• Tablespace BEGIN BACKUP
Log Writer (LGWR) writes:
• At commit
• When 1/3rd full
• When there is 1 MB of redo
• Every 3 seconds
• Before DBWn writes
System Monitor (SMON) Responsibilities:
• Instance recovery
– Rolls forward changes in redo logs
– Opens database for user access
– Rolls back uncommitted transactions
• Coalesces free space
• Deallocates temporary segments.
Process Monitor (PMON) Cleans up after failed processes by:
• Rolling back the transaction
• Releasing locks
• Releasing other resources
• Restarting dead dispatchers
Checkpoint (CKPT) Responsible for:
• Signaling DBWn at checkpoints
• Updating datafile headers with checkpoint information
• Updating control files with checkpoint information
Archiver (ARCn)
• Optional background process
• Automatically archives online redo logs when ARCHIVELOG mode is set
• Preserves the record of all changes made to the database
16. Why do you run orainstRoot and ROOT.SH once you finalize the Installation?
orainstRoot.sh needs to be run to change the Permissions and groupname to 770 and to dba.
Root.sh (ORACLE_HOME) location needs to be run to create a ORATAB in /etc/oratab or /opt/var/oratab in Solaris and to copy dbhome, oraenv and coraenv to /usr/local/bin.
orainstRoot.sh
[root@oracle11g ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to dba.
The execution of the script is complete
root.sh
[root@oracle11g ~]# /u01/app/oracle/product/11.1.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/11.1.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
For Oracle installation on unix/linux, we will be prompted to run a script 'root.sh' from the oracle inventory directory.this script needs to run the first time only when any oracle product is installed on the server.
17. Oracle Database 11g New Feature for DBAs?
1) Automatic Diagnostic Repository [ADR]
2) Database Replay
3) Automatic Memory Tuning
4) Case sensitive password
5) Virtual columns and indexes
6) Interval Partition and System Partition
7) The Result Cache
8) ADDM RAC Enhancements
9) SQL Plan Management and SQL Plan Baselines
10) SQL Access Advisor & Partition Advisor
11) SQL Query Repair Advisor
12) SQL Performance Analyzer (SPA) New
13) DBMS_STATS Enhancements
14) The Result Cache
15) Total Recall (Flashback Data Archive)
Note: The above are only top new features, there are other features as well introduced in 11g which will be included subsequently
18. What is the Difference Between Local Inventory and Global Inventory? What is oraInventory ?
oraInventory is repository (directory) which store/records oracle software products & their oracle_homes location on a machine. This Inventory now a days in XML format and called as XML Inventory where as in past it used to be in binary format & called as binary Inventory.
There are basically two kind of inventories,
One is Local Inventory (also called as Oracle Home Inventory) and other is Global Inventory (also called as Central Inventory).
19. What is Global Inventory ?
Global Inventory holds information about Oracle Products on a Machine. These products can be various oracle components like database, oracle application server, collaboration suite, soa suite, forms & reports or discoverer server . This global Inventory location will be determined by file oraInst.loc in /etc (on Linux) or /var/opt/oracle (solaris). If you want to see list of oracle products on machine check for file inventory.xml under ContentsXML in oraInventory Please note if you have multiple global Inventory on machine check all oraInventory directories)
You will see entry like
HOME NAME=”ORA10g_HOME” LOC=”/u01/oracle/10.2.0/db” TYPE=”O” IDX=”1?/
20. What is Local Inventory ?
Inventory inside each Oracle Home is called as local Inventory or oracle_home Inventory. This Inventory holds information to that oracle_home only.
21. What is Oracle Home Inventory?
Oracle home inventory or local inventory is present inside each Oracle home. It only contains information relevant to a particular Oracle home. This file is located in the following location:
$ORACLE_HOME/inventory
It contains the following files and folders:
· Components File
· Home Properties File
· Other Folders
22. Can I have multiple Global Inventory on a machine ?
Quite common questions is that can you have multiple global Inventory and answer is YES you can have multiple global Inventory but if your upgrading or applying patch then change Inventory Pointer oraInst.loc to respective location. If you are following single global Inventory and if you wish to uninstall any software then remove it from Global Inventory as well.
23. What to do if my Global Inventory is corrupted ?
No need to worry if your global Inventory is corrupted, you can recreate global Inventory on machine using Universal Installer and attach already Installed oracle home by option
-attachHome
./runInstaller -silent -attachHome -invPtrLoc $location_to_oraInst.loc
ORACLE_HOME=”Oracle_Home_Location” ORACLE_HOME_NAME=”Oracle_Home_Name”
CLUSTER_NODES=”{}”
24. What is RESULT Cache?
11G Backgroung Processes?
The following process are added in 11g as new background processes.
1 dbrm DB resource manager
2 dia0 Diagnosability process
3 fbda Flashback data archiver process
4 vktm Virtual Timekeeper
5 w000 Space Management Co-ordination process
6 smc0 Space Manager process
NOTE : The above six are mandatory processes.
But 11g has 56 new processes added which can be queried using
25. If any one of these 6 mandatory background processes is killed/not running, the instance will be aborted ?
Background processes are started automatically when the instance is started.
Mandatory background processes are DBWn, LGWR, CKPT, SMON, PMON, and RECO. All other processes are optional, will be invoked if that particular feature is activated.
If any one of these 6 mandatory background processes is killed/not running, the instance will be aborted.
Any issues related to backgroud processes should be monitored and analyzed from the trace files generated and the alert log.
26. Literal Vs. Bind Variables?
27. Select * from emp where dept=10; what level should i configure for better performance Where Clause .... Literal or Bind Variables? Expalin?
28. What is a Baseline?
29. Incarnation? Explain in detail? Where the incarnation information will be stored?
30. Hard Parse Vs. Soft Parse?
31. What is semaphores, semaphores?
32. What is latch?
33. What is Enqueue?
34. What is SGA_TARGET and SGA_MAX_SIZE ?
Oracle SID is the unique name that uniquely identifies your instance/database where as the service name is the TNS alias can be same or different as SID.
2. What are the steps to install oracle on Linux system? List two kernel parameter that effect oracle installation?
Initially set up disks and kernel parameters, then create oracle user and DBA group, and finally run installer to start the installation process. The SHMMAX & SHMMNI two kernel parameter required to set before installation process.
3. What are bind variables?
With bind variable in SQL, oracle can cache queries in a single time in the SQL cache area. This avoids a hard parse each time, which saves on various locking and latching resource we use to check object existence and so on.
4. What is the difference between data block/extent/segment?
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
5. What is the difference between PGA and UGA?
When you are running dedicated server then process information stored inside the process global area (PGA) and when you are using shared server then the process information stored inside user global area (UGA).
6. What is SGA? Define structure of shared pool component of SGA?
The system global area is a group of shared memory area that is dedicated to oracle instance. All oracle process uses the SGA to hold information. The SGA is used to store incoming data and internal control information that is needed by the database. You can control the SGA memory by setting the parameter db_cache_size, shared_pool_size and log_buffer.
Shared pool portion contain three major area:
Library cache (parse SQL statement, cursor information and execution plan),
data dictionary cache (contain cache, user account information, privilege user information, segments and extent information,
data buffer cache for parallel execution message and control structure.
7. What is the difference between SMON and PMON processes?
SMON (System Monitor) performs recovery after instance failure, monitor temporary segments and extents; clean temp segment, coalesce free space. It is mandatory process of DB and starts by default.
PMON (Process Monitor) failed process resources. In shared server architecture monitor and restarts any failed dispatcher or server process. It is mandatory process of DB and starts by default.
8. What is a system change number (SCN)?
SCN is a value that is incremented whenever a dirty read occurs.
SCN is incremented whenever a deadlock occurs.
SCN is a value that keeps track of explicit locks.
SCN is a value that is incremented whenever database changes are made.
9. What is the main purpose of ‘CHECKPOINT’ in oracle database? How do you automatically force the oracle to perform a checkpoint?
A checkpoint is a database event, which synchronize the database blocks in memory with the datafiles on disk. It has two main purposes: To establish a data consistency and enable faster database Recovery.
The following are the parameter that will be used by DBA to adjust time or interval of how frequently its checkpoint should occur in database.
LOG_CHECKPOINT_TIMEOUT = 3600; # Every one hour
LOG_CHECKPOINT_INTERVAL = 1000; # number of OS blocks.
10. What happens when we fire SQL statement in Oracle?
First it will check the syntax and semantics in library cache, after that it will create execution plan.
If already data is in buffer cache it will directly return to the client.
If not it will fetch the data from datafiles and write to the database buffer cache after that it will send server and finally server send to the client.
11. What is the use of large pool, which case you need to set the large pool?
You need to set large pool if you are using: MTS (Multi thread server) and RMAN Backups. Large pool prevents RMAN & MTS from competing with other sub system for the same memory. RMAN uses the large pool for backup & restore when you set the DBWR_IO_SLAVES or BACKUP_TAPE_IO_SLAVES parameters to simulate asynchronous I/O. If neither of these parameters is enabled, then Oracle allocates backup buffers from local process memory rather than shared memory. Then there is no use of large pool.
12. What does database do during the mounting process?
While mounting the database oracle reads the data from controlfile which is used for verifying physical database files during sanity check. Background processes are started before mounting the database only.
13. What are logfile states?
“CURRENT” state means that redo records are currently being written to that group. It will be until a log switch occurs. At a time there can be only one redo group current.
If a redo group containing redo’s of a dirty buffer that redo group is said to be ‘ACTIVE’ state. As we know log file keep changes made to the data blocks then data blocks are modified in buffer cache (dirty blocks). These dirty blocks must be written to the disk (RAM to permanent media).
And when a redolog group contains no redo records belonging to a dirty buffer it is in an "INACTIVE" state. These inactive redolog can be overwritten.
One more state ‘UNUSED’ initially when you create new redo log group its log file is empty on that time it is unused. Later it can be any of the above mentioned state.
14. What is log switch?
The point at which oracle ends writing to one online redo log file and begins writing to another is called a log switch. Sometimes you can force the log switch.
ALTER SYSTEM SWITCH LOGFILE;
How to check Oracle database version?
SQL> Select * from v$version;
15. Explain Oracle Architecture?
Oracle Instance:
a means to access an Oracle database,always opens one and only one database and consists of memory structures and background process.
Oracle server:
a DBMS that provides an open, comprehensive, integrated approach to information management,Consists of an Instance and a database.
Oracle database:
a collection of data that is treated as a unit,Consists of Datafiles, Control files, Redo log files. (optional param file, passwd file, archived log)
Instance memory Structures:
System Global Area (SGA):
Allocated at instance startup, and is a fundamental component of an Oracle Instance.
SGA Memory structures:
Includes Shared Pool, Database Buffer Cache, Redo Log Buffer among others.
Shared Pool :
Consists of two key performance-related memory structures Library Cache and Data Dictionary Cache.
Library Cache:
Stores information about the most recently used SQL and PL/SQL statements and enables the sharing of commonly used statements.
Data Dictionary Cache :
Stores collection of the most recently used definitions in the database Includes db files, tables, indexes, columns etc. Improves perf. During the parse phase, the server process looks at the data dictionary for information to resolve object names and validate access.
Database Buffer Cache:
Stores copies of data blocks that have been retrieved from the datafiles. Everything done here.
Redo Log Buffer :
Records all changes made to the database data blocks, Primary purpose is recovery. Redo entries contain information to reconstruct or redo changes.
User process:
Started at the time a database User requests connection to the Oracle server. requests interaction with the Oracle server, does not interact directly with the Oracle server.
Server process:
Connects to the Oracle Instance and is Started when a user establishes a session.
fulfills calls generated and returns results.
Each server process has its own nonshared PGA when the process is started.
Server Process Parses and run SQL statements issued through the application, Reads necessary data blocks from datafiles on disk into the shared database buffers of the SGA, if the blocks are not already present in the SGA and Return results in such a way that the application can process the information.
In some situations when the application and Oracle Database operate on the same computer, it is possible to combine the user process and corresponding server process into a single process to reduce system overhead.
Program Global Area (PGA):
Memory area used by a single Oracle server process.
Allocated when the server process is started, deallocated when the process is terminated and used by only one process.
Used to process SQL statements and to hold logon and other session information.
Background processes:
Started when an Oracle Instance is started.
Background Processes Maintains and enforces relationships between physical and memory structures
There are two types of database processes:
1. Mandatory background processes
2. Optional background processes
Mandatory background processes:
– DBWn, PMON, CKPT, LGWR, SMON
Optional background processes:
– ARCn, LMDn, RECO, CJQ0, LMON, Snnn, Dnnn, Pnnn, LCKn, QMNn
DBWn writes when:
• Checkpoint occurs
• Dirty buffers reach threshold
• There are no free buffers
• Timeout occurs
• RAC ping request is made
• Tablespace OFFLINE
• Tablespace READ ONLY
• Table DROP or TRUNCATE
• Tablespace BEGIN BACKUP
Log Writer (LGWR) writes:
• At commit
• When 1/3rd full
• When there is 1 MB of redo
• Every 3 seconds
• Before DBWn writes
System Monitor (SMON) Responsibilities:
• Instance recovery
– Rolls forward changes in redo logs
– Opens database for user access
– Rolls back uncommitted transactions
• Coalesces free space
• Deallocates temporary segments.
Process Monitor (PMON) Cleans up after failed processes by:
• Rolling back the transaction
• Releasing locks
• Releasing other resources
• Restarting dead dispatchers
Checkpoint (CKPT) Responsible for:
• Signaling DBWn at checkpoints
• Updating datafile headers with checkpoint information
• Updating control files with checkpoint information
Archiver (ARCn)
• Optional background process
• Automatically archives online redo logs when ARCHIVELOG mode is set
• Preserves the record of all changes made to the database
16. Why do you run orainstRoot and ROOT.SH once you finalize the Installation?
orainstRoot.sh needs to be run to change the Permissions and groupname to 770 and to dba.
Root.sh (ORACLE_HOME) location needs to be run to create a ORATAB in /etc/oratab or /opt/var/oratab in Solaris and to copy dbhome, oraenv and coraenv to /usr/local/bin.
orainstRoot.sh
[root@oracle11g ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to dba.
The execution of the script is complete
root.sh
[root@oracle11g ~]# /u01/app/oracle/product/11.1.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/11.1.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
For Oracle installation on unix/linux, we will be prompted to run a script 'root.sh' from the oracle inventory directory.this script needs to run the first time only when any oracle product is installed on the server.
17. Oracle Database 11g New Feature for DBAs?
1) Automatic Diagnostic Repository [ADR]
2) Database Replay
3) Automatic Memory Tuning
4) Case sensitive password
5) Virtual columns and indexes
6) Interval Partition and System Partition
7) The Result Cache
8) ADDM RAC Enhancements
9) SQL Plan Management and SQL Plan Baselines
10) SQL Access Advisor & Partition Advisor
11) SQL Query Repair Advisor
12) SQL Performance Analyzer (SPA) New
13) DBMS_STATS Enhancements
14) The Result Cache
15) Total Recall (Flashback Data Archive)
Note: The above are only top new features, there are other features as well introduced in 11g which will be included subsequently
18. What is the Difference Between Local Inventory and Global Inventory? What is oraInventory ?
oraInventory is repository (directory) which store/records oracle software products & their oracle_homes location on a machine. This Inventory now a days in XML format and called as XML Inventory where as in past it used to be in binary format & called as binary Inventory.
There are basically two kind of inventories,
One is Local Inventory (also called as Oracle Home Inventory) and other is Global Inventory (also called as Central Inventory).
19. What is Global Inventory ?
Global Inventory holds information about Oracle Products on a Machine. These products can be various oracle components like database, oracle application server, collaboration suite, soa suite, forms & reports or discoverer server . This global Inventory location will be determined by file oraInst.loc in /etc (on Linux) or /var/opt/oracle (solaris). If you want to see list of oracle products on machine check for file inventory.xml under ContentsXML in oraInventory Please note if you have multiple global Inventory on machine check all oraInventory directories)
You will see entry like
HOME NAME=”ORA10g_HOME” LOC=”/u01/oracle/10.2.0/db” TYPE=”O” IDX=”1?/
20. What is Local Inventory ?
Inventory inside each Oracle Home is called as local Inventory or oracle_home Inventory. This Inventory holds information to that oracle_home only.
21. What is Oracle Home Inventory?
Oracle home inventory or local inventory is present inside each Oracle home. It only contains information relevant to a particular Oracle home. This file is located in the following location:
$ORACLE_HOME/inventory
It contains the following files and folders:
· Components File
· Home Properties File
· Other Folders
22. Can I have multiple Global Inventory on a machine ?
Quite common questions is that can you have multiple global Inventory and answer is YES you can have multiple global Inventory but if your upgrading or applying patch then change Inventory Pointer oraInst.loc to respective location. If you are following single global Inventory and if you wish to uninstall any software then remove it from Global Inventory as well.
23. What to do if my Global Inventory is corrupted ?
No need to worry if your global Inventory is corrupted, you can recreate global Inventory on machine using Universal Installer and attach already Installed oracle home by option
-attachHome
./runInstaller -silent -attachHome -invPtrLoc $location_to_oraInst.loc
ORACLE_HOME=”Oracle_Home_Location” ORACLE_HOME_NAME=”Oracle_Home_Name”
CLUSTER_NODES=”{}”
24. What is RESULT Cache?
11G Backgroung Processes?
The following process are added in 11g as new background processes.
1 dbrm DB resource manager
2 dia0 Diagnosability process
3 fbda Flashback data archiver process
4 vktm Virtual Timekeeper
5 w000 Space Management Co-ordination process
6 smc0 Space Manager process
NOTE : The above six are mandatory processes.
But 11g has 56 new processes added which can be queried using
25. If any one of these 6 mandatory background processes is killed/not running, the instance will be aborted ?
Background processes are started automatically when the instance is started.
Mandatory background processes are DBWn, LGWR, CKPT, SMON, PMON, and RECO. All other processes are optional, will be invoked if that particular feature is activated.
If any one of these 6 mandatory background processes is killed/not running, the instance will be aborted.
Any issues related to backgroud processes should be monitored and analyzed from the trace files generated and the alert log.
26. Literal Vs. Bind Variables?
27. Select * from emp where dept=10; what level should i configure for better performance Where Clause .... Literal or Bind Variables? Expalin?
28. What is a Baseline?
29. Incarnation? Explain in detail? Where the incarnation information will be stored?
30. Hard Parse Vs. Soft Parse?
31. What is semaphores, semaphores?
32. What is latch?
33. What is Enqueue?
34. What is SGA_TARGET and SGA_MAX_SIZE ?
No comments:
Post a Comment